Assignment Single Man Lifts

ReplyCandaceOctober 19, 2011 at 6:41 pm

Weighty blog post Kim:)

I cling more to God…

Sometimes, I think about what would happen if I didn’t tune into, wait for, and rely upon God for wisdom & revelation; I may end up with…

– A relationship I never should have been in…
– A ministry I never should have started…
– A job I never should have accepted…
– A trip I never should have taken…
– A course correction I never should have made and now I’m lost & farther away from the purposes of God like the Israelites who ended up wondering around for 40 years on what should have been an 11-day journey…

This short list alone should have us running to God. When I don’t know what to do, HE DOES. The moment we are able to let go and let God work is one of the most liberating and peaceful moments we will ever find ourselves in.

For major decisions, I may mull over questions like:

– Why would I?
– Why won’t I?
– Why don’t I?
– Why shouldn’t I?
– Why should I?
– Why aren’t I?
– What regret will I have if I don’t?
– What might happen if I do?
– What will I never know if I don’t?
– What will it cost if I do?
– What will it cost if I don’t?

As I sit with the answers, God usually presses me on a certain one.

Friendships…

Friendships are huge and consume a big part of our life. We cherish our friendships and we’d do almost anything to nurture & keep them forever.

Love the way Jesus connected with people. Jesus had a healthy variety of friendships, some very deep, and, he was even able to confront well without damaging the relationship. Confrontation is part of healthy friendships, even if it’s just putting out a speed-bump to slow friends down enough to rethink. Most of us avoid confrontation but shouldn’t; we should get comfortable with moments of being uncomfortable. Even keeping balance is a form of confrontation where you require friends to come across the bridge halfway either by asking or being busy with others till they do; sometimes WE create the monster by ignoring balance.

Another common challenge: some people spiritually flourish and grow into the trees that God intended with roots down deep and delicious fruit, while others remain sprouts. It becomes tough to share, and sometimes negative feelings continually surface that you’re busy coping with instead of enjoying each other’s company.

We need to be at least open to the possibility that some friendships may just be for A SEASON.

Ministry…

Thought of this blog entry by Chris Caine:

“Are You Willing to be Misunderstood?”

I woke up this morning with the phrase resounding in my spirit: “Christine, will you continue to be willing to be misunderstood in order to take more ground for my Kingdom?”

This was not what I expected to hear at 6am on a Monday morning. This past week I have preached numerous messages on risk and faith, and then last night I spent time with 20 single, young women who asked me questions about how I have stayed on track over the past 20 years. I realized that many of my answers came back to the same thing…I had to be willing to take steps of faith that were often misunderstood by those around me (family, friends, fellow sojourners).

I have learned that our willingness to be misunderstood is what determines whether we actually end up fulfilling the purpose God has for our lives.

Rarely have others understood initially the things God had revealed to me previously, or required of me. Any success I have seen has been directly proportionate to my willingness to not seek the approval or understanding of man, but instead to simply be obedient to God.

We cannot expect others to understand and support what at times we ourselves do not even understand. But I have found that once fruit is produced, and success can be measured, people will begin to affirm, and even applaud those things that used to not make sense.

Many times I have followed God into what seems like an abyss, only to find that He is asking me to pave a path so that others may follow. I have not always understood the reasons, methods, or big picture, but have remained obedient and eventually time has revealed much.

So here I am again, on the edge of what I feel will be a time of unprecedented growth and expansion, and once again my willingness to be misunderstood by others will determine how far I will go. Jesus was consistently misunderstood, but stayed on track and fulfilled His mission…and He is my example.

Enjoy your week Kim!! xoxx

You wouldn’t try to twist a hex nut with a Phillips screwdriver, and you wouldn’t rip plywood with a chop saw. Don’t send scaffolding to do a manlift job.

When your work space is a couple of stories off the ground, you need a stable work platform to get the job done both correctly and safely. You need an aerial lift of some kind. Is a manlift the right machine for you?

What Is a Manlift?

Many specialized machines are designed to lift workers and their equipment up toward a work site. Boom lifts have great range and articulation, but they are too heavy and wide to get into tight spaces. Scissor lifts are narrower, but can only rise straight up.

What if you need to get through a narrow entrance, work on a fragile floor, and reach 15 to 100 in the air? You need a manlift, also known as a man lift, personal lift, or personnel lift.

Like boom lifts, manlifts feature telescoping and articulating arms that can reach up and around. Unlike boom lifts, manlifts do not contain heavy self-driving mechanisms. Smaller manlifts have no motor and must be pushed around. Tracks power larger units. If you need an affordable machine and only need to travel vertically, consider a belt manlift.

A heavy boom lift will drive through places a powered manlift will not, but it can be a hazard to indoor flooring. If you are working inside a church, for instance, with a beautiful tile floor, the weight of your lift is critical. Don’t crack that floor.

An 80′ diesel/dual fuel articulating boom lift weighs over 34,000 pounds. An 89′ atrium manlift has a slightly longer reach but weighs a dainty 10,000 pounds. The manlift, at under six feet wide, will also slip through doorways the eight-foot wide boom lift will not.

When to use a Manlift

Indoors is where manlifts are the most applicable. They are designed to be gentle on floors and sneak through double or even single doorways. Once inside, you can change lightbulbs, paint ceilings, or repair joists at high altitudes.

While boom lifts rely on heavy bases to be stable, narrow and nimble manlifts, need to unfold legs to keep from tipping. With the legs extended, manlifts aren’t going anywhere. When it’s time to move, the boom must be retracted, and the workers must dismount before the lift is repositioned. If you need to move around while workers are in the basket, choose a boom lift.

Picking the right aerial equipment requires you to answer a few questions:

  • Will you be moving the lift over rough terrain?
  • Do you need to be careful not to damage the floor?
  • Are you working indoors or outside?
  • Will you be moving through narrow spaces?
  • How often will you be moving the aerial lift?
  • How high do you need to reach?

If you need to get through a single or double door and operate on a sensitive floor, and you won’t be in constant motion, then a manlift might be the machine for the job. Remember that new concrete takes up to 30 days to cure. Don’t park a 20-ton diesel boom lift on it.

Hazards Associated With Manlifts

Any aerial lift carries risks of falling, tipping, electrocuting or crushing workers. Proper training and certification are required. Operators and supervisors must be aware of the unique dangers of operating a power lift.

At the start of the work day, inspect the machine and all safety equipment. If something is not right, make it right. An advantage to renting rather than buying a lift is that you can trust that we take expert care of the equipment you are using.

Before positioning the lift, check the environment. Test the ground quality, note all overhead hazards, and check the surrounding area. Read all of the manufacturer’s instructions and know the limits of the machine. How much weight can it hold? How much wind can it tolerate?

If you are using your manlift indoors, you may not be thinking about the wind. Consider whether opening the doors at both ends of a large building will cause a sudden cross breeze. Think of everything, and you’ll have fewer surprises.

Shut down all unnecessary electrical sources. An electrical arc can cover a surprisingly long distance. Treat every wire, line, and socket as if it was live.

A manlift presents a different set of hazards than a boom lift or a scissor lift. Because manlifts are designed to be lightweight and narrow, proper deployment of the outriggers is critical. The manlift is inherently tippy. Use extra care when parking and moving the lift.

Safety Protocols for Operating a Manlift

The fastest way to lose money in business is not by missing a deadline, by being outbid, or by having unexpected costs. Rather, it’s by workplace injuries. They cost you in workers’ compensation, loss of production, delays in job completion, and in damage to your reputation.

Do you want to be well known for consistent excellence and safety, or for being the contractor who had that giant accident? You could lose clients, workers, and your job. Employers pay out nearly $1 billion per week in workers’ comp. You don’t have to be one of those employers. Take the time required to work safely.

The bigger the machine, the greater the risk for more severe injuries. How can you minimize the chances of injuries while using a manlift?

  • Train all operators and supervisors appropriately and consistently.
  • Adhere to all of the manufacturer’s guidelines while maintaining and operating the equipment.
  • Do not override or disable any of the hydraulic, electrical, or mechanical safety devices on the lift.
  • Never attempt to move the manlift when it is occupied.
  • Never let workers get between the guard rails and joists, beams, or other overhead obstacles. If the basket moves, they could be crushed.
  • Stay at least 10 feet from all electrical lines. Treat every wire, line, transformer, or socket like they are live.
  • Use a restraining harness or belt at all times. Attach it to the platform, not the guard rail.
  • Use wheel chocks, brakes, and outriggers properly. Double check them before allowing any worker into the basket.
  • Add the weight of all equipment and tools to the weight of the workers, being sure not to exceed the limit for the machine.
  • Have multiple sets of eyes alert for hazards and changing conditions.
  • Allow plenty of time to do a job, so no one feels rushed. Haste can lead to mistakes.

Take the time to consider the physics of aerial lift operation. Excessive weight at the end of a long lever may result in disaster. A small force at the end of the arm can become a massive force at the base of the lift, particularly with a lightweight manlift that is reliant on extended legs for stability.

Patience, awareness, and diligence will always pay off in the long run. The worst thing that can happen is not being stuck with high labor costs or with an overdue deadline. It’s an accident that can damage an employee and your reputation.

Manlift Training

Just because you’re only renting a lift for days or hours, it doesn’t mean you don’t need training. Once you’ve rented the lift, how you use it is your responsibility. Take the necessary steps to train yourself and your people. Doing so is easier and cheaper than you may think.

Genie offers Lift Pro Online Operator Training. Contact them online or call 855-251-0423. The training begins with online videos, tutorials, and quizzes. It concludes with a hands-on session at your local Genie dealer.

OSHA also offers manlift certification. For as low as $79, you can find training for a broad range of industrial equipment. OSHA courses are 100 percent online.

Besides, education is an investment in yourself and your workers. Once trained, your certified safety personnel can be trainers for the rest of your workforce.

Frequently Asked Questions

How do I rent a manlift? After considering the specifications of the lift you need, go to BigRentz.com. Browse our extensive inventory of equipment and process your lift rental online.

For how long can I rent a manlift? We offer rentals from eight hours to 20 days. Consider renting multiple machines for the different needs of your job. You might get it all done cheaper and faster.

Will a manlift work in emergency situations? Yes. Emergency personnel uses aerial platforms for a variety of rescue purposes.

Can I use power tools on a manlift? Of course. Many lifts come with power outlets built-in. When selecting the right lift, consider the number of outlets and how much space you’ll need for equipment.

Ready to Get to Work?

Aerial work platforms come in a wide variety of sizes, articulations, and power sources to suit a broad range of jobs. Carefully consider your needs, environment, budget, and work requirements before choosing the right lift from BigRentz.com. Have questions about which lift to choose? Don’t hesitate to call us at 888-242-4715.

With the right lift, the right training, and the right workers, you’ll be able to do amazing things. Your clients will wonder how you snuck through a narrow doorway and reached all the way up there to produce beautiful results.

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *